That’s a Good Idea

Consultant John Ball shares the proper way to dump the truck to avoid a mess.

Consultant John Ball shares a better way than scraping endlessly with a putty knife to clean the paver.

Paving consultant John Ball shares why it’s important to offset the material transfer vehicle (MTV) while paving.

We’ve all looked at different lighting sources to get a good view of the mat or the operator’s platform or a look into the hopper when we’re paving at night. One idea I’ve seen recently and that I recommend for the crew is to pick up a light you can stick to the paver anywhere you need it to shine.

Water use restrictions and permitting challenges continue to increase, making it harder for operations to find ways to stay profitable while using fewer resources. As a result, aggregates and mining operations are moving toward new technology to conserve natural resources while increasing long-term savings and return on investment. Here’s how. Reduce Water Use One way […]

Here’s how to protect the bogies of a tracked paver, thus protect mat quality and your bottom line.

Do yourself a favor and make sliding out the extensions a quick-and-easy measurement to check during paving. Clean the extensions thoroughly, and then use a tape measure to mark each inch along the length of the extension.

The screed is supposed to float along, smoothing out the mix in an even, beautiful black lane. When the screed tilts sharply to the front or back, it will affect material placement and experience wear and tear on the bottom of the screed plates. These are not good things to have happening if your goal […]